Linksys routers have maintained their position as one of the most preferred networking devices throughout the years. They are known for delivering unmatchable wired and wireless speeds. However, things seem unpleasant when the Linksys router stops responding. If you’re reading this post, there’s a high possibility that you are stuck with the same mess. But, relax! Why scratch the head when the Linksys router troubleshooting tips discussed in this write-up can help you? Read on to find the solution to your problem.
Fixed: Linksys Router Not Responding
- Reboot Your Linksys Router
Do you own a smartphone? What do you do when it starts behaving weirdly out of nowhere? You either leave it idle for some time or restart it. Well, the same thing is required to be implemented with your Linksys router. You have to restart your Linksys router. But, within the span of powering off and powering on your router, you are supposed to give it some rest. Don’t get it? Read these instructions:
- Locate the button labeled Power on your Linksys router.
- Press it as soon as you find it.
- Give some rest to your router by pulling its plug (if available) out of the power socket.
- Plug in your router again.
- Push the Power button.
As soon as you’re done with the restarting procedure, check if your router’s status changes from unresponsive to responsive. If you’re still finding yourself unlucky, the next hack can be implemented.
Also read: Linksys range extender
- Check the Power Socket
The very first reason behind the unresponsive behavior of the Linksys wireless router is the inadequacy of the power being supplied to it. Did you cross-check the wall outlet before connecting your Linksys router to it? No? Well, this is where you lagged. Like every other electronic gadget, a sufficient power supply is necessary for your router to do its job.
So, check the power socket right away and see if it is damaged at any point. If it is, then you can get it repaired. Else, another power socket will be ready to assist you with the task of powering up the Linksys router. But, what if there’s nothing wrong with the wall socket? In that case, sudden power outages might be at fault. We advise you to rope in a UPS for the purpose of powering up your Linksys router.
- Cut Down the Modem-Router Distance
After performing router setup via the myrouter.local login procedure, users are suggested to take their routers to a new location. It is done so that no area in the house will remain a dead zone. You might have followed the same suggestion. But, it seems that you implemented the half knowledge only due to which your Linksys router has become unresponsive. Relocation of the router is recommended but this relocation can’t be done out of the range of the modem.
This is to inform you that the WiFi signals of your modem will struggle to reach the Linksys router if an immense distance is separating them. Thus, consider cutting down the modem-router distance. However, we recommend you not make the distance zero. Else, your dream of getting a response from Linksys router will merely turn into reality.
- Verify the Ethernet Connection
Like the aforementioned factors, the Ethernet cable linking your WiFi devices can also be at this foul play. Before you jump to conclusions, let us tell you how? Your Linksys router won’t respond if the Ethernet cable connecting the modem and router isn’t properly fitting the ports. In the second scenario, it might be damaged.
Thus, irrespective of the situation, you should focus on solutions instead. You should never ignore the rules of Ethernet connection. The first rule suggests making the connection strong (finger-tight) whereas the second rule says not to bring in a damaged Ethernet cable to the work. So, follow these rules and see if your Linksys router is still being rude to you. If yes, then the last resort is still waiting to be given a shot.
- Re-Configure Your Router
The last resort you can try to bring your Linksys device back to work is its reconfiguration. Before reconfiguration, we suggest you go with the reset process. So, push the Reset button and let your router regain its factory-set settings.
As soon as the router resets, access the Linksys router login window and start configuring your WiFi device again.
Final Words
The Linksys router not responding issue can disturb you at any time. In that scenario, we advise you not to lose calm and implement the troubleshooting tactics underlined above. Hopefully, you’ll have a great time with your Linksys router from now onwards.
For more click
