Blown fiberglass insulation provides superior airtight sealing. This makes blown insulation ideal for preventing noise from circulating throughout the home. This type of insulation can also be used to block out noise from noisy neighbors and pets. If you’re considering installing blown fiberglass insulation, consider the following factors: Price, R-value, and air quality.
Costs of blown-in fiberglass insulation
There are several factors to consider when calculating the costs of blown fiberglass insulation. First of all, the area of your home that needs to be insulated will determine the average cost per square foot. As the area increases, the cost per square foot will decrease. The cost for a 2,000-square-foot attic will be around $1.10 per square foot per inch, while a one-thousand-square-foot home will be around $1.50. Another factor to consider is the R-value of the insulation. A higher R-value will cost more per inch, but it will also take more time to install.
Fiberglass is one of the cheapest types of insulation, costing between $0.50 and $1.10 per square foot. Fiberglass also has advantages such as fire and insect repellency, and it absorbs moisture without degrading its insulation properties. However, it’s important to note that this type of insulation isn’t as healthy as other types of insulation. It also emits volatile organic compounds (VOCs) that can affect the indoor air quality.
Fiberglass has an average R-value of 2.5 to 3.5 per inch and is environmentally friendly. Its cost is lower than other types of insulation, such as cellulose and rockwool. It is also more durable and fire-resistant, and it does not shift like other materials do. Lastly, fiberglass doesn’t retain moisture like cellulose does, making it a better choice for wall applications.
Its R-value
When it comes to the R-value of blown fiberglass insulation, it is important to know that it will decrease in the cold. The insulation will lose up to 50% of its R-value and will lose a significant amount of heat through convection. In cold climates, cellulose is a better choice than fiberglass.
Blown fiberglass insulation is typically less dense than loose-fill fiberglass. Older loose-fill fiberglass had convective loops. However, today’s loose-fill insulation consists of small chunks that resist convection. In a study, researchers from Oak Ridge National Laboratory found that cellulose did not suffer from this problem. This change caused fiberglass insulation manufacturers to change the way they made their products.
During installation, a contractor may pump up loose fill fiberglass insulation with air. This temporary measurement is usually higher than the actual R-value. The homeowner will not know they have been cheated until they do the math. The R-value of blown fiberglass insulation is 2.2 to 2.7 per inch.
Blown fiberglass insulation is available in a variety of sizes. It is easier to handle and install than rolled fiberglass. In addition, it requires no special tools. This type of insulation is often installed by people rewarded by quantity. This can lead to poor installation and a lower R-value.
Its impact on air quality
When you are considering installing blown-in fiberglass insulation in your home, it’s important to consider the effect it has on indoor air quality. Fiberglass is a porous material and when it is exposed to heat or fire, it can produce airborne particles. These microscopic particles can’t be seen with the naked eye, but they can be harmful to people’s health. There are many potential causes of asthma, but one common cause is poor indoor air quality.
Some companies have made progress toward improving their product’s air quality. Among them are CertainTeed and Owens Corning. These companies are the largest producers of this type of insulation, and both are trying to increase the amount of recycled glass they use in their products. These companies say that they now use an average of thirty percent recycled glass in their products. However, obtaining a consistent supply of high-quality clear glass cullet has been a challenge.
Another factor affecting air quality is the amount of PF used in the manufacturing process. While manufacturers don’t disclose the exact amount of PF, they say that it comprises between five and 7% of a typical residential fiberglass insulation product. This amount of PF can make up to 10 percent of the overall material cost. The majority of this substance is dispersed during manufacturing and is captured by pollution control equipment.
While there is no one single method of installation of blown-in fiberglass, there are many advantages to this method. It is fast and easy to apply and can fill cracks and spaces that are hard to reach by a regular installer. Also, it can be cheaper than traditional fiberglass batts.